Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 1. Dynamic binding capacity (DBC) at 10% breakthrough. A) Comparison between MabSelect PrismA (dashed line) and Fibro PrismA (solid line) with log residence time. The residence time for Fibro™ PrismA was < 1 min and for MabSelect™ PrismA 4–5 min. B) Fibro PrismA DBC against residence time fitted by a two- parameter power function (dashed line). IgG1(•); IgG4–1 (∎); IgG4–2 (▴); IgG4–3(▾) and trivalent Fc (◆).

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Binding Assay, Comparison

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 2. Binding signal between different concentrations of proteins and PrismA ligands. A) Illustration of the SPR technique to determine static binding capacity. B) Experimental data and the fit to a Langmuir isotherm for binding signal against protein concentration. C) Error margins of parameter Qmax for each mAb. D) Error margins of parameter keq for each mAb.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Binding Assay, Protein Concentration

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 4. Protein impurity clearance by MabSelect PrismA at 0.25 CV min-1 (∎) and Fibro PrismA at 40 MV min-1(•) as a function of the load density. Aggregates reduction is shown on the left hand side for IgG1, IgG4–3 and Trivalent Fc; while host cell protein (HCP) reduction is on the right hand side for the same proteins.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques:

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 5. Comparison of chromatograms for different elution volumes (10 MV and 15 MV) with HiTrap (0.4 mL) and HiScreen (3.75 mL) Fibro™ PrismA devices using IgG4–3 as the model. A) Whole chromatograms starting from sample loading; B) Elution profile. HiTrap Fibro PrismA and HiScreen Fibro PrismA were operated using ¨Akta Pure 25 and ¨Akta Pure 150, respectively.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Comparison

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 6. Overlay of 200 cycles of IgG4–3 capture on Fibro PrismA for: A) Chromatograms; B) Delta pressure drop; C) Eluate peak width at half height; D) Peak height; E) Eluate volume; and F) Protein recovery.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques:

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 7. Eluate quality over 200 cycles of IgG4–3 capture on Fibro PrismA. A) Aggregate reduction; B) Log HCP reduction; C) Intensity Average Particle size; and D) Protein A ligand leakage level.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques:

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 9. Cost comparison between MabSelect PrismA and Fibro PrismA at manufacturing scale (2000 L). A) Total cost comparison for a single batch. Cost per gram mAb processed for up to 20 harvests at a manufacturing scale for B) A new membrane device is replaced every harvest; and C) The membrane device is replaced every 4 harvests (200 cycles).

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Comparison, Membrane

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 8. Helium ion microscopy analysis of Fibro PrismA before and after 200 cycles. A), B) Unused Fibro PrismA. C), D) Outlet region of the Fibro PrismA after 200 cycles at two different resolutions. The red circles showed polymer beads of fibers resulting from the electrospinning process.

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Microscopy, Polymer

Journal: Biochemical Engineering Journal

Article Title: Economic optimization of antibody capture through Protein A affinity nanofiber chromatography

doi: 10.1016/j.bej.2023.109141

Figure Lengend Snippet: Fig. 10. Cost comparison between MabSelect PrismA and Fibro PrismA at A) Pilot scale (200 L) and B) Clinical Scale (500 L).

Article Snippet: The resin column, HiScreen MabSelectTM PrismA (4.7 mL) with a 15–40 nm pore diameter, 10 cm bed height and 40 m2 g-1 surface area, was also purchased from Cytiva (Sweden).

Techniques: Comparison

Journal: Cell reports

Article Title: Delineating the mechanism of anti-Lassa virus GPC-A neutralizing antibodies

doi: 10.1016/j.celrep.2022.110841

Figure Lengend Snippet:

Article Snippet: HiTrap MabSelect PrismA , GE Healthcare , Cat# 17549851.

Techniques: Purification, Mutagenesis, Recombinant, Expressing, Electron Microscopy, Transfection, Plasmid Preparation, Software, Crystallization Assay, High Content Screening